Task Force Tips Y4E-RP

Product Details

Y4E-RP
PANEL MOUNT MONITOR OPERATOR STATION

Part No:Y4E-RP

Details

PANEL MOUNT MONITOR OPERATOR STATION
This operator station allows the electric monitor to be controlled from a remote location and is designed to be flush mounted in a panel. This station may be used as the central location for terminating the wires from the monitor, incoming power, or hard wired inputs. All terminal blocks for wire connections are removable for easy terminating. The enclosure has an o-ring seal, liquid tight strain relief fittings with o-rings, and a membrane switch to keep water out. A 30' long cable for incoming power and communication connections is supplied pre-connected. This operator station is equipped with "last button pressed" software or can be configured as a "master" station.

Weight: 3.2 lbs (0 kg)

More details
Related Products

Operation Energy Source Electric (12/24 vdc)

Related Videos

COPY URL LINK BELOW AND PASTE IT INTO AN EMAIL TO SHARE

Online Technical Support Material

RC Monitor FAQ's (pdf)
RC Monitor Electrical Controls (pdf)
Remote Monitor Operator Station with Display (pdf)

Technical Specifications and Drawings

Related Product Groups

› Hurricane Monitors - Remote Controlled

› Master Stream Series - Remote Controlled

› Monsoon Monitors - Remote Controlled

› Tornado Monitors - Remote Controlled

› Typhoon Monitors - Remote Controlled

PRODUCT SERIES OVERVIEW

• TFT RC monitor accessories and components are for use with Tornado RC, Hurricane RC, Typhoon RC and Monsoon RC and allow control of the monitors from remote locations.

• The Panel Mount, Tethered and Wireless Operator Stations have a waterproof membrane switch to control vertical, horizontal, and nozzle patterns as well as the programmable PARK and Oscillate functions. Power, PARK and Oscillate indicator lights are standard. Two Auxiliary buttons are included and require the Remote Auxiliary Function Relay, Extend-A-Gun RC interface, or valve interface box to control lights, Extend-A-Gun RC, valve actuators, or other equipment.

• All operator stations are equipped with "last button pressed" software so any button presses from the operator station will take over control from any other operator station. These operator stations can also be configured, by an internal DIP switch, as a "Master" control station so that commands from the operator station cannot be overridden.

Task Force Tips ® is a registered trademark of Task Force Tips, Inc.
TFT ® is a registered trademark of Task Force Tips, Inc.